您好,欢迎访问无锡合达电子设备有限公司官网!
0510-83212339
189-2133-9208
无锡合达电子设备有限公司
您的位置:首页 > 新闻动态 > 行业知识
联系我们

无锡合达电子设备有限公司

地址:无锡市梁溪区惠钱路55号25幢
电话:189-2133-9208

咨询热线189-2133-9208

厂家介绍老化房系统及安全措施保护

发布时间:2018-12-12人气:273

老化房系统及安全措施保护1、老化过程可全自动控制,具有部分异常自处理功能,让操作自动化、简单化。a.动切断循环风机、电热等电源;老化房自行降温,继续老化,待总老化时间到,黄色灯亮起,告知老化完毕。b.产品超温保护控制。在温度超过产品老化温度上限时,自动切断产品供电,以保护老化房产品过温老化,影响其性能;同时蜂鸣器响、红色灯亮起。温度正常自动恢复供电。c.加热器PID控制。采用SSR配套使用,温度到达设定温后,根据需要自动无级调节加热器功率大小,器件无机械损耗且室内温度稳定性高。

Aging room system and safety measures protection 1. Aging process can be fully automatic control, with part of the abnormal self-handling function, so that the operation is automated and simplified. A. Turn off the power supply of circulating fan and electric heating; the aging room cools itself and keeps aging. When the total aging time is up, the yellow light will be on and the aging will be notified. B. Overtemperature protection control of products. When the temperature exceeds the upper limit of the product aging temperature, the power supply of the product is automatically cut off to protect the aging property from overheating and aging, affecting its performance; at the same time, the buzzer sounds and the red light turns on. Normal temperature automatically restores power supply. C. PID control of heater. SSR is used together. When the temperature reaches the set temperature, the power of the heater can be adjusted automatically and steplessly according to the need. The device has no mechanical loss and high indoor temperature stability. 2、控制系统集成老化功能设计。设计功能控制电柜,老化所需时间、温度、各类操作开关可在一个控制电柜上操作;电柜面板设计美观、操作简单。

2. Integrated aging function design of control system. Designing functional control cabinet, aging time, temperature, all kinds of operating switches can be operated on a control cabinet; cabinet panel design beautiful, simple operation.

3、具有多重保护功能,安全可靠。

3. It has multiple protection functions and is safe and reliable.

a、加热器防MC粘连设计。SSR无触点关断,无机械动作、损耗,杜绝意外。

A. Anti-MC adhesion design of heater. SSR has no contact turn-off, no mechanical action and loss, to prevent accidents.

b、加热器连接采用耐高温线材。

B. The heater is connected by high temperature resistant wire.

c、室内安装防爆型照明灯,提高灯泡寿命,防止外力撞破。

C. Install explosion-proof lighting in the room to prolong lamp life and prevent external force from breaking.

d、库体采用难燃保温材料,保温性能好,安全系数高。

D. The reservoir body is made of non-flammable heat preservation material, which has good heat preservation performance and high safety factor.

e、超温声光报示功能:老化过程中出现超温状况,则亮红灯,蜂鸣器响起。

E. Overtemperature acoustooptic function: If overtemperature occurs during aging, the red light will be turned on and the buzzer will ring.

f、电热防干烧,风机故障或风管内温度过高时自动切断整个电源,同时蜂鸣器响。

F. Electric heating and dry burning prevention. When the fan fails or the temperature in the duct is too high, the whole power supply will be cut off automatically, and the buzzer will ring at the same time.

g、电加热与风机联动设计,风机未能启动时加热器无法单独启动。

G. Electric heating and fan linkage design, the heater can not start alone when the fan fails to start.

辛苦整理!转载请注明来自 http://www.chinasavant.cn/show.asp?id=113

推荐资讯

189-2133-9208