您好,欢迎访问无锡合达电子设备有限公司官网!
0510-83212339
13861812138
无锡合达电子设备有限公司
您的位置:首页 > 新闻动态 > 行业知识
联系我们

无锡合达电子设备有限公司

地址:无锡市梁溪区惠钱路55号25幢
电话:13861812138

咨询热线13861812138

厂家介绍老化房的维护保养小窍门

发布时间:2018-12-17人气:301

老化房是航空、汽车、家电、科研等领域必备的测试设备,老化房用于测试和确定电工、电子及其他产品及材料进行高温的温度环境变化后的参数及性能,老化房适用于对大型零部件,整机进行气候模拟试验。一台这么大型的老化房试验设备,想要每次试验都可以标准完美就必须定期检查和维护,使设备保持在最佳的工作状态,下面是由我司列出的维护保养小窍门,希望可以帮助到大家。
Aging room is a necessary test equipment in aviation, automobile, household appliances, scientific research and other fields. Aging room is used to test and determine the parameters and performance of electrical, electronic and other products and materials after high temperature environment changes. Aging room is suitable for climate simulation test of large parts and whole machine. A test equipment of such a large aging room, if you want every test to be perfect, you must check and maintain it regularly to keep it in the best working condition. Here are the maintenance tips listed by our company. Hope to help you.
一、应建立老化房使用档案,以方便老化房的维护维修。使用档案应记录老化房每次运行起止时间(日期)、试验的种类、环境温度,当系统发生故障时,应对故障现象作尽可能详细的描述,对系统进行维护、维修的内容也应尽可能详细地记录。这是维护老化房及其设备最重要的一个窍门。
First, the use files of aging rooms should be established to facilitate the maintenance and repair of aging rooms. The use of archives should record the starting and ending time (date), type of test and environmental temperature of each operation of the aging room. When the system fails, the failure phenomena should be described as detailed as possible, and the contents of maintenance and maintenance of the system should also be recorded as detailed as possible. This is the most important trick to maintain the aging room and its equipment.
二、老化房必须由专人操作维护。严格遵守系统操作规程,避免他人违章操作系统。
2. The aging room must be operated and maintained by special personnel. Strictly abide by the operating rules of the system to avoid other people violating the operating system.
三、每月定期进行一次主电源开关(漏电短路器)动作试验,以确保此开关在满足负载能力下作为漏电保护器之用。具体步骤为,首先请确认总电源开关打到“ON",即系统通电,然后请按试验按钮。若漏电断路,器的开关杆落下来则此功能正常。
3. The operation test of the main power switch (leakage short circuit) is carried out regularly every month to ensure that the switch can be used as leakage protector when the load capacity is satisfied. The specific steps are: first, make sure that the main power switch is on, that is, the system is energized, and then press the test button. If the leakage current breaks, the switch rod of the device falls down, the function is normal.
四、在步入式老化房内放置的试验产品离空气调节通道的吸、排风口应有一定的距离,以免妨碍空气的流量。
4. The test products placed in the step-in aging room should be at a certain distance from the suction and exhaust outlets of the air-conditioning passage, so as not to hinder the air flow.

辛苦整理!转载请注明来自 http://www.chinasavant.cn/show.asp?id=137

推荐资讯

13861812138