您好,欢迎访问无锡合达电子设备有限公司官网!
0510-83212339
189-2133-9208
无锡合达电子设备有限公司
您的位置:首页 > 新闻动态 > 行业知识
联系我们

无锡合达电子设备有限公司

地址:无锡市梁溪区惠钱路55号25幢
电话:189-2133-9208

咨询热线189-2133-9208

厂家对客户使用老化房维护保养建议

发布时间:2018-12-17人气:199

如果老化房设备故障,将直接影响到产品的各项指标测试。如何才能当老化房设备出现故障时及时的进行维修与有效的修复保养呢?根据多年的行业经验给出以下老化房维护保养建议:1.老化房维护保养排风机、风道的保养排风机,风道每半年需清洁一次,检查排风机的绝缘度;风道是否有异物堵塞
If the equipment in the aging room fails, it will directly affect the testing of various indicators of the product. How can we repair and maintain the aging room equipment in time and effectively when it breaks down? According to many years of industry experience, the following suggestions for maintenance and maintenance of aging rooms are given: 1. Maintenance and maintenance of exhaust fans and air ducts in aging rooms. The air ducts should be cleaned every six months to check the insulation of exhaust fans; whether the air ducts are blocked by foreign bodies;
2.内外部的清洁与保养机器在操作前应先将内部杂质杂物清除配电室内每年至少清洁一次以上,清洁时,可利用吸尘器将室内灰尘吸除即可控制箱体外部每年亦须清洗一次以上,清洗时先用肥皂水擦拭即可
2. Internal and external cleaning and maintenance machines should clean the distribution room at least once a year before operation. When cleaning, indoor dust can be cleaned by vacuum cleaner, and the outside of the control box must be cleaned more than once a year. When cleaning, it can be wiped with soapy water.
3.面板上仪表的保养
3. Maintenance of instrument on panel
配电箱面板上的仪表每月需清洁一次
Instruments on the panel of distribution boxes need to be cleaned once a month.
清洁时用干棉布擦拭即可
Wipe with dry cotton cloth when cleaning.
4.设备风机要经常加黄油
4. Equipment fan should often add butter
老化房房体结构一般采用保温板(双面彩色钢板,中间加保温材料)在现场拼装而成,房间尺寸均根据客户要求设计。整个房间外表美观,结构牢固,同时安装方便快捷,施工期短。在房间墙上,根据需要可设置观察窗,方便在室外观察到室内产品测试情况。在墙上还配有不同电压的插座,以满足产品老化测试时的需要。
The structure of aging room is usually assembled on site with insulation board (double-sided color steel plate, with insulation material in the middle), and the room size is designed according to customer's requirements. The whole room has beautiful appearance, firm structure, convenient installation and short construction period. On the wall of the room, the observation window can be set up according to the need to facilitate the inspection of indoor product testing in the outdoor. The wall is also equipped with different voltage sockets to meet the needs of product aging testing.

辛苦整理!转载请注明来自 http://www.chinasavant.cn/show.asp?id=140

推荐资讯

189-2133-9208